Before You Stick: Read This!
Most walls are perfect for decals, and every decal's made from a premium fabric material that is kind to walls. Installing is a breeze for some and takes a bit more care for others, either way, we've put this guide together to set you up for the best result, and our team's here to support you every step of the way.
💡 Hot Tip: Keep Your Backing Sheet
Thinking of moving house one day? Hang onto the backing sheet. It's the easiest way to safely remove and transport your decals to a new wall, and you can reposition them again and again without losing any grip
✌️ 1. Check Your Walls
Decals stick best to smooth, painted walls. They won’t hold properly on:
- Textured, bumpy, or popcorn walls (not enough smooth surface to grip)
- Unprimed or flaking surfaces
- Freshly painted walls, give it 45 days for the paint to fully cure first
- Walls repainted without a primer coat between layers, if those layers aren't properly bonded to each other, your decal can lift away along with the top coat
Wash & Wear or Low VOC paint? Most walls are totally fine, but a small number of these paints can affect how well the adhesive grips. A bonding primer from your local hardware store can help if you're at all unsure.
✌️ 2. Wipe Your Walls
This one matters more than it looks! Any dust or grime left behind can stop your decal from sticking properly and cause bubbling underneath. Give the wall a wipe with a clean, damp cloth, then let it dry completely (at least 2 hours) before you start.
✌️ 3. Watch Out for Air Bubbles
Air bubbles are the most common hiccup, but they're totally avoidable. Smooth as you go and push the air out toward the edges as you apply, rather than trying to fix it all at the end. Take it slow and you'll get a clean, bubble free finish.
✌️ 4. Installation
Important: Do not remove the entire backing paper at once! This might cause the decal to fold and stick to itself.
✌️ 5. Start with Piece 1
Find the marker that says: "START HERE against left wall." Peel off piece 1 of the road, align it to your left wall, and press it firmly onto the wall, smoothing outwards to remove any air bubbles. Reposition if needed. This piece sets the highest point of the road, so make sure you’re happy with the placement before continuing. Keep the road ends straight!
✌️ 6. Piece 2
Peel off piece 2 and align the “a side” to the road you just applied. Press it firmly onto the wall, smoothing outwards to push out any bubbles. Adjust if needed.
✌️ 7. Piece 3
Peel off piece 3 and align the “b side” to the road on your wall. Press and smooth just like before.
✌️ 8. Piece 4
Peel off piece 4 and align the “c side” to the road on your wall. Smooth it on, then trim any excess with sharp scissors. If your wall is longer and you’ve got a road extension, add it here and trim as needed.
✌️ 9. Add the Vehicles, Rainbows and Trees (Consult Visual Guide)
Once the road’s down, be creative or consult the visual guide to place the rest of the elements. Use the same peel, align, and smooth technique.
✌️ 10. Save the Backing Sheet
Keep it handy! It makes moving or storing your decals a breeze.
✌️ 11. Enjoy Your Space!
Step back and admire the open road, effortlessly bringing style to your space!