Before You Stick: Read This!
Most walls are perfect for decals, and every decal's made from a premium fabric material that is kind to walls. Installing is a breeze for some and takes a bit more care for others, either way, we've put this guide together to set you up for the best result, and our team's here to support you every step of the way.
💡 Hot Tip: Keep Your Backing Sheet
Thinking of moving house one day? Hang onto the backing sheet. It's the easiest way to safely remove and transport your decals to a new wall, and you can reposition them again and again without losing any grip
✌️ 1. Check Your Walls
Decals stick best to smooth, painted walls. They won’t hold properly on:
- Textured, bumpy, or popcorn walls (not enough smooth surface to grip)
- Unprimed or flaking surfaces
- Freshly painted walls, give it 45 days for the paint to fully cure first
- Walls repainted without a primer coat between layers, if those layers aren't properly bonded to each other, your decal can lift away along with the top coat
Wash & Wear or Low VOC paint? Most walls are totally fine, but a small number of these paints can affect how well the adhesive grips. A bonding primer from your local hardware store can help if you're at all unsure.
✌️ 2. Wipe Your Walls
This one matters more than it looks! Any dust or grime left behind can stop your decal from sticking properly and cause bubbling underneath. Give the wall a wipe with a clean, damp cloth, then let it dry completely (at least 2 hours) before you start.
✌️ 3. Watch Out for Air Bubbles
Air bubbles are the most common hiccup, but they're totally avoidable. Smooth as you go and push the air out toward the edges as you apply, rather than trying to fix it all at the end. Take it slow and you'll get a clean, bubble free finish.
✌️ 4. Installation
Important: Do not remove the entire backing paper at once! This might cause the decal to fold and stick to itself.
- Start with the First Labelled Piece - Refer to the visual guide to identify the first piece to apply (e.g., Apply 1 EDGE or 3 EDGE first). Completely remove this piece from the large backing sheet.
- Position and Secure a Small Section to the Wall First - Take the first piece and carefully align it to the wall, starting with the edge closest to the indicated starting point. Stick down just a small portion of this edge firmly against the wall—this helps secure the alignment without attaching the entire piece at once. Once the edge is secure, use your hand to gradually smooth the decal outward from the starting edge, pressing firmly to stick the rest of the decal to the wall bit by bit. Avoid sticking the entire piece down all at once, as this can cause wrinkles or bubbles."
- Smooth the Decal - Continue smoothing with your hands or a soft tool, working outward from the initial stuck edge to ensure a bubble-free application. If you need to reposition the decal, gently peel it away from the wall. Be careful not to stretch the material, as stretching will make it difficult to align all the pieces correctly.
- Continue with the Next Pieces - Follow the same process for subsequent pieces (e.g., 1a to 2a or 2b to 3b), ensuring alignment and smooth application as you go.
- Reposition if Necessary - If alignment isn't perfect, gently lift the decal and adjust as needed. Avoid pulling too hard or stretching the decal during repositioning. Smooth it down again to secure.
-
Final Touches - Once all pieces are applied, step back and admire your beautifully transformed wall.